Detroit Diesel EPA04 MBE 900 Operator's Manual page 98

MAINTENANCE
filter element, twist the lower
edge of the filter element to the
side. See Figure 46.
Figure 46 Cap with Oil Filter
Element
NOTICE:
To prevent damage to the filter
housing, ensure that no foreign
objects get inside it. Do not wipe
clean the filter housing.
5. Replace the O-ring on the cap.
See Figure 46.
6. Install the new filter into the cap.
Make sure the filter element is
securely in place.
7. Screw the cap onto the oil filter
housing. Tighten the cap 25 N·m
(18 lb·ft).
8. Install the oil drain plug, using a
new O-ring. Tighten the plug 65
N·m (48 lb·ft).
88
DDC-SVC-MAN-0055
9. Add new engine oil through the
oil fill (see Figure 47).
Figure 47
PERSONAL INJURY
To avoid injury from slipping and
falling, immediately clean up any
spilled liquids.
NOTE:
Engine oil fill capacity with a standard
oil pan for the six-cylinder engine
is 30.6 quarts (29.0 L). For the
four-cylinder engine with a standard oil
pan, fill capacity is 16.7 quarts (15.8
L).
10. Fill until the maximum fill level
on the oil dipstick has been
reached. Do not overfill.
All information subject to change without notice. (Rev. )
Copyright © 2009 DETROIT DIESEL CORPORATION
Oil Fill