Delta 40-540 Instruction Manual page 5

16" variable speed scroll saw with quickset ii blade changing feature
Table of Contents

Advertisement

4. Screw threaded end of stud (H) Fig. 6, with flat
washer (J) through slot in angle of tilt scale (D) and into
tapped hole (K).
5. Reassemble handle (G) Fig. 7, and screw and spring
(F) which were removed in STEP 3, onto stud (H). Move
table (A) to the horizontal position and lock table (A), by
turning handle (G) clockwise.
6. Using the wrench (L) Fig. 8, supplied, loosen the two
screws on bottom of bracket (M) that fasten bracket to
rod (N).
7. Rotate bracket (M), to the position shown in Fig. 9.
Loosen lock handle (R) and insert holddown rod (S) into
hole in bracket (M), as shown.
K
A
5
D
J
H
Fig. 6
H
F
G
Fig. 7
M
L
Fig. 8
S
M
R
Fig. 9
N

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents