Note: If you are having unexpected results with this programming code, scan
the Activate Defaults bar code on
programming bar code above.
Wincor Nixdorf Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nix-
dorf terminal. This bar code sets the baud rate to 9600 bps and the data format
to 8 data bits, no parity, 1 stop bit.
Note: If you are having unexpected results with this programming code, scan
the Activate Defaults bar code on
programming bar code above.
NCR Bioptic Settings
Wincor Nixdorf Terminal Settings
page 8-4
first, then scan the
page 8-4
first, then scan the
2 - 11