Upc-A/Ean-13 With Extended Coupon Code - Honeywell Voyager 1250g User Manual

timeout by scanning the bar code below, then setting the timeout (from 0-
65535 milliseconds) by scanning digits from the
scanning Save. Default = 100.
Note: The Addenda Timeout setting is applied to all addenda and coupon
code searches.
UPC-A Addenda Separator
When this feature is on, there is a space between the data from the bar
code and the data from the addenda. When turned off, there is no space.
Default = Off.
UPC-A Redundancy
If you are encountering errors when reading UPC-A bar codes, you may
want to adjust the redundancy count. Redundancy adjusts the number of
times a bar code is decoded before transmission, which may reduce the
number of errors. Note that the higher the redundancy count, the longer it
will take to decode the bar code. To adjust the redundancy, scan the UPC-
A Redundancy bar code below, then scan a redundancy count between 0
and 10 on the
Then scan the

UPC-A/EAN-13 with Extended Coupon Code

Use the following codes to enable or disable UPC-A and EAN-13 with Extended
Coupon Code. When left on the default setting (Off), the scanner treats Cou-
pon Codes and Extended Coupon Codes as single bar codes.
6 - 36
Addenda Timeout
On
Programming Chart
Save bar code. Default = 0.
UPC-A Redundancy
Programming
inside the back cover of this manual.
Chart, then
* Off