All Scan - Raymarine Ray49E Owner's Handbook Manual

38
Your Ray49E is equipped with four types of scan options: All Scan, Saved
(Memory) Scan, Priority All Scan and Priority Saved Scan. The following
illustration demonstrates how to initiate All Scan but the procedure is the same
for all scan mode options.
Whenever Weather Alert is activated, the WX Alert channel is also monitored dur-
Note:
ing the Scan Modes. If the WX Alert tone is detected, the scan is halted to receive the
Weather Alert broadcast.
terminate
To
• SCAN/SAVE key on the microphone
• CLEAR key on the transceiver

All Scan

In All Scan mode, all channels in the channel set are scanned in sequence. After
the last channel number has been scanned, the cycle repeats.
When active, SCAN ALL appears on the display.
SCAN ALL
VHF OPS
>SCAN MODE
HI/LO POWER
SAVE CH
SCAN ALL
50 46.1718N
001 17.1713W
AM11:57LOC
the SCAN mode and return to standby mode, press:
SCAN ALL
SCAN ALL
SCAN ALL
Ray49E Marine VHF Radio
SCAN MODE
>SCAN ALL
SCAN ALL+16
SCAN SAVED
SCAN ALL
SCAN ALL
D10258-1