Tuning The Channel; Selecting A Weather Channel (If Available) - Raymarine Ray49E Owner's Handbook Manual

Chapter 3: General Operations

3.6 Tuning the Channel

...on the Transceiver
Rotate the CH/OK knob clockwise to increase the channel number.
Rotate the CH/OK knob counter clockwise to decrease the channel number.
...on the Microphone
Press and release the UP arrow to increase the channel number.
Press and release the DOWN arrow to decrease the channel.
Press and hold either key for rapid channel scrolling.

3.7 Selecting a Weather Channel (If Available)

The US National Oceanic and Atmospheric Administration (NOAA) broadcasts
continuous weather reports and severe weather alerts, as needed. If so equipped,
your Ray49E is programmed to receive 10 weather channels and sound an alarm
if a weather alert is received.
To enter Weather mode, press and hold the CLEAR key for 3 seconds on the
transceiver.
PRESS and HOLD for 3 secs
55 60 5
50
45
40
35
30
The WX indicator appears in the channel set field. Rotate the CH/OK knob on the
transceiver or use the channel up /down keys on the microphone to select from
channels WX01 through WX10.
Press and release the CLEAR key again to return to normal operation.
Note:
1. WX broadcasts can only be heard in the US and Canada.
2. The Ray49E can receive these broadcasts only if the unit has been upgraded
by the distributor to use WX Channels.
3. During Weather mode, the PTT, HI/LO, and SCAN/SAVE keys are disabled and
an error beep sounds if pressed.
10
15
20
25
162.550
26 04.2172N
080 09.0933W
AM11:56LOC
29