Invacare Pronto M41 User Manual page 55

Removing
• Remove the quick release pin (3) that secures the
footboard assembly (1) to the wheelchair frame by
depressing the button while sliding the pin out.
• Remove the footboard assembly from the wheelchair
frame.
Installing
• Position the footboard assembly onto the wheelchair
frame so that the mounting hole in the wheelchair
frame (4) aligns with the desired mounting hole in the
footboard assembly.
• Install the quick release pin by depressing the button
while sliding the pin in. Ensure that the detent balls (2)
are engaged with the outer edge of the tube (5) (Detail
"A").
Detail "A":
55