To end the Temporary Manual Override:
Press and wait for HOLD to display on the LCD.
HOLD
CLEAR
Press again. This will return the set temperature to the current program
set temperature.
NOTE: The Auto Season Changeover feature will not operate while the thermostat is in Temporary Manual
Override. Refer to the Auto Season Changeover feature on page 26 for more information.
NOTE: If the thermostat has not been programmed, then a Temporary Override becomes a Permanent Override.
See the next section for more information.
Permanent Manual (Vacation) Override
To hold your manual override for vacation or just an extended period of time:
Press to make the current program's temperature the HOLD
HOLD
temperature. HOLD will alternate on the display with the normal time
CLEAR
and temperature display.
Follow the Temporary Override Instructions above to change the
Permanent Override temperature.
You can confirm the held set temperature by pressing either
To end the Permanent Manual Override:
Press again. The thermostat will return to the current program, and the
HOLD
flashing HOLD display will be canceled.
CLEAR
NOTE: The Auto Season Changeover feature will not operate while the thermostat is in Permanent Manual
Override. Refer to the Auto Season Changeover feature on page 26 for more information.
or
for less than 1 second.
M
T W Th F Sa Su
SET TEMP
:
HO
LD
°
C
AM
PM
H
73
°
C
H
AUTO COOL
HEAT
TEMP