Hunter 44428 Owner's Manual & Installation Instructions page 11

Programming
Programming Your Thermostat (Cont.)
PROG HOUR
Use
Display the day to be programmed and use
NOTE: Another approach to programming is to first program all weekdays or weekends the same, then display a particular day
and change the programs of only that individual day by using
NOTICE: During the programming steps, if you don't make an entry within 15 seconds, the display will automatically return to current time
and temperature. If this happens, just press the "PROGRAM" key to return to the program number you were entering.
• To program for summer, slide function switch OFF-A/C-HEAT to
A/C. The programming is the same as you did for winter.
• Any change of time will be effective for both summer and winter. If
your summer schedule is different, however, just revise the program.
• If program time is left at 0:00, that particular program will not be
effective; e.g.
• If Program #2 has time 0:00, the thermostat will jump from Program
#1 to Program #3.
Displaying Programs
To review programs for winter,
slide function switch to HEAT.
MIN
MO TU WE TH FR SA SU
I2 : 00
AM
PROG UNTIL
NEXT
PM
PROG
DAY
PROG# 1 2 3 4 SET TEMP HOLD ROOM TEMP
EMERG AUX HEAT COOL USAGE DELAY AUTO-RECOVERY
MO TU WE TH FR SA SU
I2 : 00
PROG AM
UNTIL
NEXT
PM
PROG
DAY
PROG# 1 2 3 4 SET TEMP HOLD ROOM TEMP
EMERG AUX HEAT COOL USAGE DELAY AUTO-RECOVERY
PROG HOUR
MO TU WE TH FR SA SU
I9 : !5
AM UNTIL
NEXT
PM PROG
PROG# 1 2 3 4 SET TEMP HOLD
EMERG AUX HEAT COOL USAGE DELAY AUTO-RECOVERY
to enter programs for Monday.
Tuesday is selected.
LOW BATT
72
LOW BATT
Wednesday is selected.
72
MIN
PROG HOUR MIN
LOW BATT
Normal display of time, temperature, and day of week.
72
ROOM TEMP
11
to enter programs.
PROG
DAY