Hunter 144860 Installation And Operation Manual page 38

1. Touch a blank area of the touch screen. SELECT FUNCTION appears.
2. Touch the or
3. Scroll through the settings with the
modes:
HEAT (
icon, red screen)
AUTO ( and
4. Touch to return to the main screen.
The icon will show on the main screen if the system is heating; the
show if the system is cooling.
NOTE: If the system is running and the
you to the SET SYSTEM MODE screen. Repeat steps 2-4 to make changes.
5. Touch the temperature icon (
6. Touch the or
NOTE: Setting the override temperature to high or low extremes will not make the temperature
change more quickly.
7. Touch to return to the main screen.
44002-01 r051807
icon. SET SYSTEM MODE appears.
or
EMHEAT (only for Heat Pump Systems)
icons) COOL (
or
).
sign to adjust the temperature.
sign to select one of the SYSTEM
icon, blue screen)
icon is touched on the main screen, it will return
OFF (no icon)
icon will