Sony KP-48V80 Service Manual page 21

Using Your New Projection TV (continued)
Watching Two Programs at One Time — P&P (Twin View
The Picture-and-Picture (P&P) feature allows
you to view two channels simultaneously,
both in a reduced size screen. The main
picture will appear on the right.
The symbol "b" or "B"
indicates which picture's TV
channel or input source can be
TV channel or
changed.
input-source
mode for the
The symbol "≥"
sub picture*
indicates which picture's
sound is being received.
7 6
TV channel or input-
source mode for the
main picture*
Sub
picture
Main picture
* It will dim in about 3 seconds.
2 6
Using the Yellow Labeled Buttons for P&P Operations
Press to alternate sound between the right and left pictures. The symbol "
AUDIO
appear for a few seconds to indicate which picture's sound is being received.
INDEX
This is useful when you need to copy down information that appears on the TV's
FREEZE screen.
GUIDE
Press to freeze both the right and left pictures.
Press again to resume P&P viewing.
SWAP Press to switch the audio and video of the right and left pictures.
Each time you press SWAP, the picture and sound of the two will be exchanged.
(under the cover)
TM )
Using the Yellow Labeled Buttons for P&P Operations
Press to display right (main) and left (sub) pictures.
Press again to close the sub picture.
Press to select either the right or left picture in order to change the TV
ACTIVE
channel or video source using the white labeled buttons below. The
symbol "b" (or "B") will appear to indicate which picture's channel or input
mode can be changed.
Press repeatedly to scroll through the available video inputs for the picture
TV/VIDEO
on which the symbol "b" (or "B") is displayed. (see "TV/VIDEO" on page
(white labeled 22)
button)
Press to select the TV channel on which the symbol "b"
CH
(or "B") is displayed. (for details, see "Watching the TV"
JUMP
on page 21)
-
or 0 9 or
Speed Surf
and ENTER
1 Press and hold CH + or – to change the channel
(white labeled button) 2 Release to display the desired channel.
ANT
Press to change between the VHF/UHF input and the AUX input for the
picture on which the symbol "b" (or "B") is displayed.
(white labeled
button)
" will
– 21 –
KP-48V80/53V80/61V80
RM-Y905
number rapidly.
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
Notes:
• The sound of the left (sub) picture is
monaural.
• Caption Vision is displayed for the right
(main) picture only.
• If one of the pictures received through
P&P is snowy, the entire screen may
become unstable. In this case, erase the
snowy channel. (see "Channel Skip/
Add" on page 35)
RM-Y905 RM-Y905
REFER TO THE
2 7