Sony KP-48V80 Service Manual page 20

KP-48V80/53V80/61V80
RM-Y905 RM-Y905 RM-Y905
Using Your New Projection TV (continued)
Watching Two Programs at One Time — PIP
The Picture-in-Picture (PIP) feature allows
you to view two channels simultaneously,
one in the full size "main" picture and one in
a smaller "window" picture.
You can move the window picture to any
location on the screen.
The symbol "b" or "B"
indicates which picture's
TV channel or input
source can be changed.
Main
picture
Window
picture
* It will dim in about 3 seconds.
z
Tip
If you press RESET in PIP mode, the window picture
will move to the bottom right (factory-preset location).
2 4
Using the Yellow Labeled Buttons for PIP Operations
CH
-
or 0 9
and ENTER
(white labeled button)
ANT Press to change between the VHF/UHF input and the AUX input for the picture on
which the symbol "b" (or "B") is displayed.
(white labeled
button)
Press to alternate sound between the main picture and the window picture. The
AUDIO
symbol "
INDEX
received.
This is useful when you need to copy down information of the main picture.
Press to freeze the desired scene in the main picture. The frozen picture is displayed
FREEZE in the window picture while viewing the normal picture in the main picture. The
GUIDE window picture size is automatically changed to 1/4 if it was 1/9 or 1/16.
Press again to resume normal PIP viewing.
Press to switch the audio and video of the main picture and the window picture.
SWAP
Each time you press SWAP, the picture and sound of the two will be exchanged.
(under the cover)
The symbol "≥"
indicates which
picture's sound is being
received.
TV channel or input-
source mode for the
6
main picture* (yellow-
green-colored)
10
TV channel or input-
source mode for the
window picture*
(white-colored)
Press to select the TV channel on which the symbol "b" is
displayed. (for details, see "Watching the TV" on page 21)
JUMP
or
Speed Surf
1 Press and hold CH + or – to change the channel number rapidly.
2 Release to display the desired channel.
" will appear for a few seconds to indicate which picture's sound is being
Using the Yellow Labeled Buttons for PIP Operations
Press to display a window picture.
Each time you press this button, the picture size will change
(1/4 n1/9 n1/16 nno display).
To close the window picture, press
Press to change the location of the window picture (counterclockwise)
POSITION
around the main picture.
(under the cover)
Press to select either the main or window picture in order to change the
ACTIVE
TV channel or video source using the white labeled buttons below. The
symbol "b" (or "B") will appear to indicate which picture's channel or input
mode can be changed.
To change the location of the window picture, move the joystick in any
direction and release it when the picture is in the desired location.
(white labeled
button)
TV/VIDEO Press repeatedly to scroll through the available video inputs for the
picture on which the symbol "b" (or "B") is displayed. (see "TV/VIDEO" on
(white labeled page 22)
button)
– 20 –
repeatedly until it disappears.
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
Note:
• If one of the pictures received through
PIP is snowy, the entire screen may
become unstable. In this case, erase the
snowy channel. (see "Channel Skip/
Add" on page 35)
2 5