Troubleshooting; Problem And Solutions; Technical Support - Hunter Ceiling Fan Light Kits User Manual

Problem
1. No display or operation.
2. Keypad does not work.
3. Erratic Display or Opera-
tion.
4. Filter and/or Pre-filter
Indicator is Flashing.
5. Cleanable Filter and/or
Carbon Pre-Filter Life
Counter is flashing 0%.
6. Unit has reduced air flow
or increased noise.
7. Remote is not working
properly.

Technical Support

If you have any additional questions or problems with your Hunter air purifier, please call
1-888-830-1326 from 8:00 am to 5:00 pm Central Time or contact us over the Internet at
www.hunterfan.com.
Solutions
• Confirm that the unit is plugged in.
• Check the installation of the front grill.
• Reset the air purifier. (See Resetting the Air Purifier on
pg. 10.)
• Key pad has been locked to prevent accidental changes
to the programs. (See Keypad Lock on pg. 9 to unlock
the key pad.)
• Reset the air purifier. (See Resetting the Air Purifier on
pg. 10.)
• The Filter and/or Pre-Filter Life Counters have reached
the estimated usage times. Check and replace or clean
filters if needed. (Refer to Filter and Pre-Filter Counters
on pg. 9.)
• The Filter and/or Pre-Filter Life Counters have greatly
exceeded the estimated usage times. Replace or clean
the corresponding filters.
• The filter is clogged and should be cleaned. (Refer to
Cleaning the Filter on pg. 12.)
• Be sure that the remote is facing the air purifier when
pressing the key.
• Check the batteries. (Refer to Remote Operation on
page 8.)
15

Troubleshooting

41558-01