Hunter Ceiling Fan Light Kits User Manual page 13

3. Gently pull on the filter to remove it from the unit. While removing the filter, note
the directional arrows printed on the top of the filter. The filter will be reinstalled
with the same orientation. Refer to Fig. 12.
4. The label on the top side of the filter points to the side that should be cleaned.
Refer to Fig. 12. With a vacuum cleaner and upholstery brush attachment, clean
the filter until all particles are removed. Do not use water or liquids to clean.
5. Install the filter with arrows pointing towards the unit. Refer to Fig. 12. Press the
filter firmly into the air purifier. To avoid damaging the filter media, you should
press on the frame of the filter only.
6. Place the front grill back onto the unit. First, line up the tab on the bottom of
the grill with the recess on the purifier base and then push the top of the grill
forward until it is closed. Refer to Figs. 6 and 7 (pg. 7). NOTE: This unit will not
operate unless the grill is in the correct position.
7. Plug in the unit.
8. To reset the filter counter, press the FILTER RESET key for 2 seconds. The Filter
Counter will return to 100% and the Filter indicator will stop flashing.
Air Purifier Maintenance
REINSTALL FILTER WITH AIRFLOW DIRECTION AR-
ROWS POINTING TOWARD UNIT.
CLEAN/VACUUM THIS
SIDE OF FILTER
Fig. 12
13
Filter Label
41558-01