Hunter 42800-01 Installation And Operation Manual page 13

Installing the Glass Bowl
1. First install two medium base incandescent bulbs.
2. Attach the extra pull chain (included) to the fan pull chain using the
plastic breakaway connector. (You may fi nd the plastic breakaway
connector on the end of the extra chain.)
3.  read the fan pull chain through the hole in the metal disk.  en,
thread the fan pull chain through the hole in the center of the glass
bowl.
4.  read the light pull chain through the hole in the center of the glass
bowl.
5. Place the cover plate up against the glass bowl. Align the holes in the
cover plate and glass bowl.
6.  read the fan pull chain and
light pull chain through the
appropriate holes.
7.  read the light pull chain
through the fi nial and screw
the fi nial onto the threaded
rod end until tight.
Pull Chain
Breakaway
Connector
42800-01 • 01/18/06
for Light Bulbs
(60 Watt Maximum)
Metal Rod
Metal Disk
Glass Bowl
Cover Plate
Finial
Hunter Fan Company
13