Toshiba RAS-B10SKVP-E Service Manual page 91

No. Part name
‚
High voltage 1) Follow to the procedure in the item
generator
2) Disconnect the connectors of the
3) Remove the fixing screw which secures the
<How to assemble the high voltage generator>
1) Put the high voltage generator on the
2) Pass the leads of the high voltage
Procedures
high-voltage generator, and disconnect the
four leads from where they are fitted into
the other components.
high voltage generator, and remove the
high voltage generator from the evaporator.
evaporator and then fix it with two screws.
generator through the area designated and
insert them into its connectors.

.
– 91 –
Remarks
Screw Screw
High voltage High voltage
generator generator
Connector C C onnector
Screw Screw
Claw Claw
Claw Claw