Toshiba RAS-B10SKVP-E Service Manual page 102

No. Part name
…
Side 1. Side cabinet (right)
cabinet
1) Perform step 1 in
2) Remove the fixing screw (ST1TØ4 × 8L
2. Side cabinet (left)
1) Perform step 1 in
2) Remove the fixing screw (ST1TØ4 × 8L
3) Remove the fixing screw (ST1TØ4 × 8L
†
Fan motor 1) Perform work of item 1 of
2) Remove the flange nut fixing the fan motor
and the propeller.
• Flange nut is loosened by turning clock-
3) Remove the propeller fan.
4) Disconnect the connector for fan motor
from the inverter.
5) Remove the fixing screws (2 pc.) holding by
hands so that the fan motor does not fall.
* Precautions when assembling the fan
Procedure
‚
and all the steps in
ƒ
.
5 pcs.) used for securing the side
cabinet to the bottom plate and valve
fixing panel.
‚
.
1 pcs.) used to secure the side cabinet
(left) onto the heat exchanger.
2 pc.) used for securing the side cabinet
to the bottom plate and heat exchanger.
Detail A
wise. (To tighten the flange nut, turn
counterclockwise.)
motor
Tighten the flange nut using a tightening
torque of 4.9 N•m.
Hook the claw onto
the bottom plate here.
Detail B
 ‚
and .
– 102 –
Remarks
B
C
The back body section is hooked
onto the bottom plate here.
Detail C
Propeller fan
Fan motor
Flange nut
A