Message Waiting - Toshiba Strata DK User Manual

Features

Message Waiting

Message Waiting
If your station is idle or busy on a call while another station tries to contact you, the calling
station can turn on the message waiting LED on your telephone. Your Message Waiting
lamp flashes when there is a message.
When you respond by pressing
will dial the telephone which set a callback message. Voice mail devices and stations can
leave message waiting indications.
Up to four Message Waiting indications can be left at a station at one time. One of the
indications is for the Message Center.
To answer a Message Waiting light
1. Lift the handset.
2. Press
3. If your telephone calls
a busy station or there
is no answer, hang up
and try later.
...or you can bypass
this message and
listen to the next
message by going on-
hook and repeating
Steps 1 and 2.
4. After receiving the
message, hang up.
To cancel the Message Waiting light
1. Lift the handset.
2. Press
26
0VJ
You hear dial tone.

. Your phone rings the device that set the indication. If there
is no answer, hang up and try later. (The LED continues to
flash.)
The LED continues to flash.
This feature is available for DK14, DK16e, DK16, DK40i,
DK40, DK424 release 1 and DK280, release 3.1 and
higher.
If the Message Waiting LED continues to flash, you have
more messages—repeat Steps 1~3 to retrieve them.
You hear dial tone.

The Message Waiting indication is cancelled.
, you will either hear a voice message or your phone
Strata DK Standard Telephone 5/00