Tone/Voice First Signaling - Toshiba Strata DK User Manual

Tone/Voice First Signaling

Your Strata DK system may be set for Tone Signaling or Voice First Signaling as the
standard internal call signaling method for calls to digital and electronic telephones. The
Tone Signal consists of repetitive ring tones, while the Voice First Signal consists of a tone
burst followed by the caller's voice. Standard telephones always ring with Tone Signaling,
no matter what the system signaling method. When you initiate a call, you can change to
the alternate signaling method.
To change the signaling mode
1. Call an internal
digital/electronic
telephone.
2. To change the mode,

press .
Strata DK Standard Telephone 5/00
If the signaling mode is set for Voice First Signaling, you
hear a single tone burst followed by the caller's voice or
sounds from the surrounding area of the called telephone.
If the signaling mode is set for Tone Signaling, you hear
repetitive ringback tone.
Ringing stops and you hear a tone burst if you changed
from Tone Signaling to Voice First Signaling. You can
converse after the tone burst.
The call rings the called station if you changed from Voice
First Signaling to Tone Signaling.
Features
Tone/Voice First Signaling
31