When The Target Projector Is Not Found - Epson EMP-1825 Operation Manual

Connecting to a Projector on a Network and Projecting
Switch toolbar display
The toolbar display is switched as follows. The toolbar display remains
as is until next switched.
Full
Normal
Simple

When The Target Projector is Not Found

Action 1. Restart the computer.
Action 2. Check if the projector network settings are set to "Quick
Connection Mode".
1825 Only)"
Action 3. Check the following if actions 1 and 2 do not help. (If it is
disconnected, check the following.)
User's Guide "Network Menu (EMP-
s
Is the indicator on the
wireless LAN unit
Not flashing
flashing?
Flashing
Are you using
commercially available
Yes
firewall software?
No
Are any of the supplied
utilities operating from
the computer's wireless
Yes
LAN unit?
No
Contact your local dealer or the
nearest address provided in the
Support and Service Guide.
s Epson Projector Contact List
17
Reinstall the wireless LAN
unit.
Create a firewall exception
for EMP NS Connection in
the firewall software you are
using.
Close the utility and restart
EMP NS Connection.