4
Select the desired language and click
[OK].
5
Click [Yes].
The software installation starts.
6
Click [Finish].
When installation is completed
8
The installed software is displayed in [All
Programs] – [CyberLink BD Solution].
Connecting the Camera to the PC
Preparation:
Set the camera's power/mode switch to OFF.
To AC Outlet
DC Connector
USB Cable
USB Connector
NOTES
•
Never disconnect the USB cable while the
access/charge lamp on the camera lights or
blinks.
•
Do not turn off the camera when the USB
cable is connected, to prevent malfunctions
of the PC.
•
Connect the camera directly to the PC, not
through a hub.
•
Do not use an extension USB cable.
•
Do not delete, move, or rename the fi les and
folders in the camera from the PC.
AC Adapter
USB Connector
33