Remote Control; Functions And Use Of Buttons; Power Off; Volume Control - Focal EASYA User Manual

EASYA
U s e r m a n u a l

remote control

Functions and use of buttons: (Fig. E)
• Power OFF: allows you to manually set the Hub to standby mode. All LEDs on the front panel are turned off. Does
not allow auto ON mode, the speaker goes straight to standby mode. Press again to return to the same status
before setting Power Off. Only the Power Off button allows you to return to ON mode.
• Input selection:allows you to select different inputs for the Hub on a cyclical basis.
• Volume Control: allows you to reduce, increase or mute the Hub volume. In silent mode, the input LED selected on
the front flashes. Press again to disable silent mode. When the "+" or "-" button is activated, the input LED selected
flashes on the Hub, and when the minimum or maximum volume is reached, the LED stops flashing.
• Controlling tracks: these functions are valid only when the Bluetooth
"previous track" and right arrow for "next track". These functions allow you to move to the next or previous tracks
only i.e. it is not a fast forward or rewind function. The "Play / Pause" middle button is used to start playback or
pause the source. (Please note: certain Smartphones are too old, or do not support the AVRCP protocol, and do not
allow this feature to be used.)
• Bluetooth linking: by selecting the Bluetooth
®
devices. Press and hold down the button for 3 seconds. When the linked mode is activated, the Bluetooth
LED starts to flash on the front of the Hub. This mode is deactivated once the device is linked, or after 30 seconds
if no device has been linked.
ON/OFF
REMOTE LEARNING
PROGRAMMATION
TELECOMMANDE
E
INPUT SELECT/
SELECTION DES ENTREES
input button on the Hub, the Hub can be linked with Bluetooth
®
PAIRING
or USB inputs are selected. Left Arrow for
®
20
®
input
®