EASYA
U s e r m a n u a l
17
Setting up the system
Connect the speakers to the mains using the cables supplied for your region (EU or U.S.).
Press the "ON" switch on the speakers to turn them "ON".
On the amplifier panel situated on the back of the speaker, select the left speaker to the "left" position and the right
speaker to the "right" position (Fig. A).
Loudspeaker position
Loudspeaker position
Right
Left
A
Connect the outlet corresponding to your region to the Hub power supply (Fig. B).
B
Connect the Hub to the mains using the standard power supply (do not use any other power supply). Plug in the
power supply into the circular plug on the Hub identified by the marking "7.5V1 ⎓ 1A" (Fig. C).
C