[f] OTHER INFORMATION
Other information is also available from the Controller Board. See "III. 7. OPERATION
BOARD" for details.
[g] CHANGE OF ICE TYPE
With the older models, changes between flake ice and nugget ice were available by
replacing the Extruding Head and Cutter. With the new models, not only the Extruding
Head and Cutter but also the refrigeration circuit is different between the flake ice model
and nugget ice model. To ensure the proper capacity and prevent a trouble with excessive
ice production, do not replace the Extruding Head and Cutter to change the ice type.
2