Safety Training Information - Icom IC-F3000 Series Instruction Manual

7
W ARN ING
RF exposure limits for "Occupational Use Only". In addition, your Icom
radio complies with the following Standards and Guidelines with regard
to RF energy and electromagnetic energy levels and evaluation of such
levels for exposure to humans:
• FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating
Compliance with FCC Guidelines for Human Exposure to Radio
Frequency Electromagnetic Fields.
• American National Standards Institute (C95.1-1992), IEEE Standard
for Safety Levels with Respect to Human Exposure to Radio Fre-
quency Electromagnetic Fields, 3 kHz to 300 GHz.
• American National Standards Institute (C95.3-1992), IEEE Recom-
mended Practice for the Measurement of Potentially Hazardous
Electromagnetic Fields– RF and Microwave.
• The accessories (antennas, batteries, belt clips, speaker-micro-
phone, etc. that is listed on pages 35–37) are authorized for use
with this product. Use of accessories other than those specified may
result in RF exposure levels exceeding the FCC requirements for
wireless RF exposure.
C AU TIO N
41

SAFETY TRAINING INFORMATION

Your Icom radio generates RF electromagnetic energy
during transmit mode. This radio is designed for and
classified as "Occupational Use Only", meaning it must
be used only during the course of employment by indi-
viduals aware of the hazards, and the ways to minimize
such hazards. This radio is NOT intended for use by the
"General Population" in an uncontrolled environment.
This radio has been tested and complies with the FCC
To ensure that your expose to RF electromagnetic
energy is within the FCC allowable limits for occu-
pational use, always adhere to the following guide-
lines: