Sensitivity; Gps/Time Setup; Manual Position - Raymarine Ray49 Owner's Handbook Manual

Chapter 4: Menu Settings
receiver sensitivity (Local mode). The LOCAL icon appears while in Local mode
and then is removed in Distant mode.

4.3 GPS/Time Setup

By default, the Ray49 auto-detects NMEA 0183 strings and decodes appropriate
latitude/longitude position and time or COG/SOG. When position data is
available, the "GPS" icon appears on the top line of the LCD. If the GPS navigation
receiver is not connected or is not functional, a manual latitude/longitude
position and UTC time can be entered and used in the DSC distress transmitted
message.

Manual Position

If no GPS data is available and the MMSI number has been programmed, the "NO
GPS" icon does not appear, and POS DATA REQ is displayed on the dot matrix
display, followed by NO POS DATA. An alarm sounds for 5 seconds or until you
acknowledge by pressing any key.
78
VHF OPS
FREQ BAND
CH NAME
>SENSITIVITY
78

SENSITIVITY

DISTANT
>LOCAL
09
MAIN MENU
>VHF OPS
GPS SETUP
SYS CONFIG
47
78
SENSITIVITY
>DISTANT
LOCAL
78
FISHING
26 04.2172N
080 09.0933W
AM11:57LOC
09
MAIN MENU
VHF OPS
>GPS SETUP
SYS CONFIG