Raymarine Ray49 Owner's Handbook Manual page 42

42
To add or remove a channel to/from memory:
1. Navigate to SAVE CH in the VHF OPS menu.
2. Press CH/OK to select SAVE CH.
3. Rotate CH/OK to select channel to be added to /removed from memory.
4. Press CH/OK to confirm (or CLR/WX to cancel).
5. To add the selected channel to memory, ensure that the arrow is pointing to
SAVE, and then press CH/OK .
To remove the selected channel from memory, navigate to CLEAR and then
press CH/OK .
The SAVED icon either appears to indicate that the current channel has been
saved in memory or disappears to indicate that it has been removed from
memory.
You can also add the current channel to memory by pressing and holding the
SCAN/SAVE
holding the key removes the channel from memory.
68
VHF OPS
SCAN MODE
HI/LO POWER
>SAVE CH
72
SAVE CHANNEL
SELECT CH
[OK] / [CLR]
72
SAVE CHANNEL
SELECT CH
[OK] / [CLR]
key on the microphone. If the channel is already saved, pressing and
Ray49 Marine VHF Radio
68
SAVE CHANNEL
SELECT CH
[OK] / [CLR]
72
SAVE CHANNEL
>SAVE
CLEAR