Power Supply Unit, Holder Inlet, Sheet Insulation - Oki OKICOLOR 8 Maintenance Manual

3.3.16 Power Supply Unit, Holder Inlet, Sheet Insulation

1. Remove the motor-fan (80-25). (See 3.3.2)
2. Remove the frame side (L), the cover assy side (R) and the cover rear (L). (See 3.3.8)
Unplug the cable 1.
3.
4. Remove the holder inlet 3 by unscrewing 2 screws 2, then remove the power switch 4 and
unplug the AC socket 5.
Draw the power supply unit 7 by unscrewing 3 screws 6, then unplug the cable 8.
5.
6
2
Figure 3.3.16 Power Supply Unit, Holder Inlet, Sheet Insulation
41057610TH Rev. 1
1
5
3
8
7
4
63 /