Assembly Instructions; General Components & Features; Additional Requirements; Step  Attach Emitter Screen - Charmglow 82300 Owner's Manual

Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.

Assembly Instructions

General Components & Features
Familiarize yourself with all components before proceeding . Refer to page 5 for hardware and components, and page 8
for specifications .
Do NOT attempt assembly unless all components are available . If you believe a component is missing or damaged,
contact -800-762-42 for assistance .
Note: All hardware is mounted on a cardboard pack and numbered to match their assembly step .

Additional Requirements

The following items are not included, but are necessary for the proper assembly of your heater . Do NOT attempt to
assemble without proper tools .
() - 7/6" Wrench
() - #2 Phillips Head Screwdriver
() - Leak Detection Solution (Instructions on how to make solution are included in Step 7)
() - 20 lb .(4-5 gallon) precision filled LP Gas Grill Cylinder
Note: You must follow all steps to properly assemble heater .
Step 1 – Attach Emitter Screen
Line up 4 holes on bottom of Emitter Screen with corresponding holes in
Emitter Bottom, and insert (4) Medium Screws in holes until tight .
Owner's manual: model 82300 portable outdoor heater 6