Step 7 Check For Leaks; Step 8 Install Access Panel - Charmglow 82300 Owner's Manual

Caution
Your Charmglow
Heater has been checked at all
factory connections for leaks.
Recheck all connections, as
movement in shipping can
loosen connections. Check
for leaks even if your unit was
assembled for you at the store.
9
Contact 1-800-762-1142 for assistance.
Step 7 – Check for Leaks
To check for leaks:
®
Portable
Make -2 oz . of leak solution by mixing one part liquid dishwashing
soap and 3 parts water .
Spoon several drops (or use squirt bottle) of the solution onto the
regulator/canister connections .
Inspect the connections and look for bubbles
If NO bubbles appear, the connection is safe .
If bubbles appear, there is a leak:
Loosen and re-tighten this connection .
Re-check for a leak .
If you continue to see bubbles after several attempts, disconnect
propane source and contact -800-762-42 .
Step 8 – Install Access Panel
Slide top tab of Access Panel inside Shroud Cover.
Lower bottom of Panel until closed, and rotate Knob until lock flange
rotates inside of slot on plastic ring.
Do not return to place of purchase.
Owner's manual: model 82300 portable outdoor heater