Your Remote Control; Turning Your Equipment On And Off - DirecTV HD RECEIVERS User Manual

YOUR REMOTE CONTROL

TURNING YOUR EQUIPMENT ON AND OFF

10 10
Mode Switch
NOTE: Each time you press a button, a green light at the top
of the remote flashes. If the light flashes several times for
just one press, it means the batteries (size AA) are getting low
and need to be replaced.
These two buttons turn your TV and DIRECTV
on or off together. If your DIRECTV
professionally, your remote has already been programmed
to operate your TV. If you need to reprogram the remote for a
new TV or for any other reason, press MENU, select "Settings
& Help", "Settings", then "Remote Control". Follow the step by
step instructions.
Use the POWER (PWR) button and Mode Switch to turn a single
component on or off (for example a DVD player or surround
sound system). Simply slide the mode switch to the position
that matches the component you want to control and then use
the POWER button to turn it off or on. The mode switch must
always be in the left-most position to control your DIRECTV
Receiver. If the mode switch is in a position that has not been
programmed, or if you press a button that is not supported by
that particular piece of equipment, an onscreen message will
pop up to alert you.
Receiver
®
System was installed
®
®