Table of Contents
Advertisement
5. DOWNLOAD AND CALIBRATION
1. Connect as Fig 6-2(RS232 serial cable is connected between COM port of PC and MON port
of TEST JIG, in general)
2. Set the Power Supply 4.0V
3. Set the 3
rd
, 4
4. Press the Phone power key, if the Remote ON is used, 1
D. Procedure
1. Connect as Fig 6-2(RS232 serial cable is connected between COM port of PC and MON port
of TEST JIG, in general)
2. Power ON PC then enter into Windows 98(Remark : Windows 2000 system could be feasible)
3. Run AUTOCAL.exe, the AUTOCAL application window will be appeared.
th
of DIP SW ON state always
st
ON state
- 98 -
Advertisement
Table of Contents
