Power Wheels H9800 Owner's Manual With Assembly Instructions page 4

C
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product
to the store.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
• Some parts were placed under the seat for shipment. Press the tab under the back of the seat and lift to access the battery compartment.
• Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any
excess lubricant.
Rear Wheel - 2
Note: Rear Wheels are
wider than Front Wheels.
Hubcap - 4
Rear Wheel Driver - 2
Parts Not Shown: Label Sheet, Cap Nut Assembly Tool
4
PARTS
Vehicle
Front Wheel - 2
Handlebar
Bushing - 2
Seat
Rear Axle
12 Volt Battery
7 / " Washer - 3
16
#8 Lock Nut - 1
#8 x 3 / " Screw - 1
4
For your convenience, we included extra fasteners!
Note: Tighten and loosen all screws with a Phillips screwdriver.
Do not over-tighten the screws.
Fasteners Shown Actual Size
Right Grip with
Large Hole
Left Grip with
Small Hole
12 Volt Charger
.437"
.437 Cap Nut - 4
#10 x 3 / " Screw - 4
4
H9800pr-0920 H9800pr-0920