Temp Alarm; Alarm Tone - Humminbird 717 Operation Manual

531524-1_A - 717 & 727 Man_Eng.qxp
(from the temperature probe that is built into the transducer) detected by the
Fishing System reaches the Temp Alarm setting, which is either set in degrees
Fahrenheit or Celsius [International Models only]. For example, if the Temp
Alarm is set to 58 degrees Fahrenheit, and the water temperature falls from 60
degrees to 58 degrees, the Temp Alarm will sound. Similarly, if the water
temperature rises from 56 degrees to 58 degrees, the Temp Alarm will also sound.
To change the Temp Alarm setting:
1. Highlight Temp Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Temp
Alarm setting. (Off, 33-120 [Fahrenheit], 0-50 [Celsius], Default = Off)
brief tone will be produced as you adjust the Alarm Tone so that you can select
the tone that you can hear best.
To change the Alarm Tone setting:
1. Highlight Alarm Tone on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Alarm
Tone setting. (High, Medium, Low, Default = Medium)
9/30/2006

Temp Alarm

Temp Alarm sounds when the water temperature

Alarm Tone

Alarm Tone selects the pitch of the alarm sound. A
60
7:24 PM Page 65