Map Datum (Advanced); Set Simulation Position (Advanced); Set Map Offset (Advanced) - Humminbird 595C Operation Manual

FF595_Man_531385-1_A_PrfE.qxd
Map Datum
(Advanced)
Map Datum allows you to change the map coordinate system used by the FishFinder to match
those of a paper map.
To change the Map Datum setting:
1. Make sure you are in Advanced User Mode, then highlight Map Datum on the
Navigation main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Map Datum setting.
(Default = WGS 84)
Set Simulation Position
(Advanced)
Set Simulation Position allows you to set the position of the boat used in the Simulator.
To set the Simulation Position:
1. Activate the cursor and move it to the new coordinates.
2. Make sure you are in Advanced User Mode, then highlight Set Simulation Position on the
Navigation main menu.
3. Use the RIGHT 4-WAY Cursor Control key to change the Simulation Position setting.
Set Map Offset
(Advanced)
Set Map Offset allows you to change the map offset used by the FishFinder.
NOTE: The Map Offset will be applied to all maps and not just the map that requires the correction.
The Map Offset should be cleared if a different map is to be used.
To change the Map Offset setting:
1. Activate the cursor and move it location where the Map Offset will be applied.
2. Make sure you are in Advanced User Mode, then highlight Set Map Offset on the
Navigation main menu.
3. Use the RIGHT 4-WAY Cursor Control key to set the Map Offset.
52
12/9/2004 2:41 PM Page 58
Clear Map Offset
(Advanced)
Clear Map Offset allows you to clear the Map Offset. Clear Map Offset is only accessible if a Map
Offset is currently active.
To Clear Map Offset:
1. Make sure you are in Advanced User Mode, then highlight Clear Map Offset on the
Navigation main menu.
2. Use the RIGHT 4-WAY Cursor Control key to clear the Map Offset.
Delete All Nav Data
(Advanced)
Delete All Nav Data allows you to delete all saved Tracks, Waypoints and Routes. This menu choice
should be used with caution.
To Delete All Navigation Data:
1. Make sure you are in Advanced User Mode, then highlight Delete All Nav Data on the
Navigation main menu.
2. Use the RIGHT 4-WAY Cursor Control key to delete all navigation data.
53