Removing The Flat Tire And Installing The Spare Tire - Hummer 2006 H3 Owner's Manual

Removing the Flat Tire and
Installing the Spare Tire
1. Remove the center cap
by placing the flat end
of the wheel wrench
in the slot on the wheel
and gently pry the
center cap out.
2. Turn the wheel wrench
counterclockwise to
loosen the wheel
nuts. Do not remove
them yet.
If your vehicle has locking lug nuts, the key is
supplied in the tool bag. Use the key along with the
wheel wrench to remove the wheel nuts from the tire.
You will now need to jack up the vehicle using the
instructions following.
Jacking Locations (Overall View)
A. Front Position — Lower Control Arm
B. Rear Position — Lower Axle
3. Locate the vehicle's jacking positions (A and B).
5-75