Table of Contents
Advertisement
8.1
SETUP OVERVIEW
The Remote Fusion Streamer Software has several new and advanced setup options not available on the web based
Fusion Streamer Viewer they are listed below.
1
Camera
2
Schedule
3
Sensor
4
Audio
5
VS Site Information
6
Network
8–1
SECTION 8
REMOTE
SOFTWARE SETUP
Includes the original features and functions of the web based software with the addition of
Motion Detection, pre/post motion detection alarms, Frame Rate setup and an on screen
display of the camera currently selected.
With the addition of recording capabilities in the Fusion Streamer Remote Software the
Schedule menu allows the creation of recording schedules for connected cameras.
The Sensor Menu allows users to configure sensor options
Allows users to setup audio options for the Fusion Streamer, IE. Audio input, Audio
Recording, 2-Way Audio, and Live Audio.
The Fusion Streamer Information Menu is used to update the Fusion Streamer's firmware,
configure e-mail notification, and enable/disable spot monitor and 2-way audio functions.
Note: Refer to chapter 5.3
Use the Network Menu to configure IP Settings and IP Filtering for the Fusion Streamer.
Note: Refer to chapter 6.4
Advertisement
Table of Contents
