Notes On Maintenance; Notes On Moisture Condensation - Honeywell FUSION STREAMER User Manual

NOTES ON CLEANING
Use a soft dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of
solvent, such as thinner and benzene, as they may damage the surface of the Fusion Streamer unit.
If you use a chemical saturated cloth to clean the unit, follow that product's instructions.

NOTES ON MAINTENANCE

This Fusion Streamer unit is designed to last for long periods of time. To keep your Fusion Streamer unit always operational we recommend
regular inspection maintenance (cleaning parts or replacement). For details contact your nearest dealer.

NOTES ON MOISTURE CONDENSATION

Moisture condensation damages the Fusion Streamer unit. Read the following information carefully.
Moisture condensation occurs during the following cases:
When you bring the Fusion Streamer unit directly from a cold place to a warm place.
When you use the Fusion Streamer unit in a room where you just turned on the heater, or a place where the cold wind from the air
conditioner directly hits the unit.
In the summer, when you use the Fusion Streamer unit in a hot and humid place just after you move the unit from an air conditioned room.
When you use the Fusion Streamer unit in a humid place.
Do not use the Fusion Streamer unit when moisture condensation may occur.
If the Fusion Streamer unit is used in such a situation, it may damage discs and internal parts. Remove any CD discs, connect the power
cord of the Fusion Streamer unit to the wall outlet, turn on the Fusion Streamer unit, and leave it for two to three hours. After two to three
hours, the Fusion Streamer unit will have warmed up and evaporated any moisture. Keep the Fusion Streamer unit connected to the wall
and moisture will seldom occur.