Sirius Satellite Radio Starmate ST5 User Manual page 27

Pickup Truck Antenna Cable Routing Procedure
Figure 12 shows how the antenna cable should be routed from the antenna to your
Starmate ST5 in a pickup truck.
Follow these detailed cable installation instructions:
1. Use a plastic putty knife or similar tool to lift the rubber molding around the wind-
shield and tuck the antenna cable underneath it.
2. Continue tucking the cable underneath the windshield molding around the wind-
shield to the lowest corner.
A
NTENNA
2. Continue Tucking Cable
Under Molding To
Bottom of Windshield
4. Bring Cable out from
Weatherstripping and
Route Under Carpet
Figure 12
1. Route Cable Under
Rubber Molding
Around Windshield
5. Bring Cable Out to
SIRIUS Receiver
Location
3. Route Cable Out of Molding
and Into Weatherstripping
Around Door Opening.
Continue to Bottom of
Door Opening.
Installation
27