3.
Refer to Figure 6 and attach the vent mount to a heating/air conditioning vent in
your vehicle. Position the two tension springs
the vent mount into the vent, far enough so that the hooks
the rear of the vent louver (see Figure 7 ). Once you are sure that the hooks have
grasped a vent louver, the tension springs
the louver.
PUSH
FM OUT
ANT
Figure 6
FM OUT
ANT
Figure 7
A
against a vent louver
C
drop down and hook
A
will keep the vent mount hooked to
A
B
D
HOOKED
Installation
B
. Then push
C
19