System Menu - GRASS VALLEY LDK 4502 User Manual

Chapter 8 - Menu structure and contents

8.2.5 System menu

Menu item
Cable
% of Max.Spec.Att.
Size
Remaining length (m)
Remaining length (ft)
Cur Attenuation (dB)
Length Unit
Remaining Length
Camera Number
Camera Mode
IP Address
IP Config Mode
IP digit 1
IP digit 2
IP digit 3
IP digit 4
Subnet Mask
Apply IP Settings
Ethernet
Ethernet Speeds
Ethernet Duplex
Camera power
MCP Available
Signalling inputs
80
Values Description
0..255 (128) Show the percentage of attenuation that is
occuring with respect to the maximum
specified value.
8mm, 11mm, 14mm, 3/8" , Selects the diameter of Triax cable in use.
1/2" , 5/8"
0..5000 (5) Shows the length of Triax cable that still can
be attached (in metres.)
0..5000 (5) Shows the length of Triax cable that still can
be attached (in feet.)
0..18 (0) Shows the present cable attenuation in dB.
km, miles Selects the unit to be used with the
Remaining Length item.
0..50 (0) Shiws the remaining length of the Triax
cable in km or miles.
1..99 (99) Selects the camera number.
C2IP , S9000 Selects the type of control network.
Man, Auto Selects manual or automatic IP
configuration mode.
1..250 (69) Select IP address digit 1 (for manual IP
configuration mode.)
0..255 (254) Select IP address digit 2 (for manual IP
configuration mode.)
0..255 (1) Select IP address digit 3 (for manual IP
configuration mode.)
1..254 (1) Select IP address digit 4 (for manual IP
configuration mode.)
0..31 (24) Select the subnet mask value ( for manual
IP configuration mode.)
exec > busy > exec Select Exec to apply the new manually set
IP settings.
100Mb, 10Mb, Auto Selects the Ethernet network speed.
Full, Half, Auto Selects the Ethernet duplex mode.
On, Off Turns the power the camera on or off
Yes, No Refer to the user's guide MCP not available
section!
LDK 4502/4503/4506 HDTV camera base station User's Guide (v3.5)
Level File
Oper
Oper Sys
Oper
Oper
Oper
Oper
Oper
Oper
Oper
Oper
Oper
Oper
Oper
Oper
Oper
Oper
Install
Install
Oper Oper
Install Oper