Using An Ocp 400 To Set Up The Base Station - GRASS VALLEY LDK 4502 User Manual

Chapter 4 - Using the Base Station

4.3 Using an OCP 400 to set up the Base Station

An OCP can be used to set up the base station instead of the Rotary/Push button.
1. Push the Setup Menu button on the OCP to open the menu.
2. Push the selection button to choose the BS submenu.
Panel
Files
Exit
Prev
The BS submenu appears. Use the Next button to view subsequent pages.
Table 4-3. Base Station set-up menu
Menu Selections
BS MONITORING
-
-
MENU
Next H PHASE
SC COARSE
-
SC FINE
Next
NOTCH LVL
NOTCH
-
-
Select the MENU item of the BS menu to access the internal menu of the Base Station. The
internal menu appears on the Base Station Text output and CVBS output (if switched on).
44
White
Bars Call
Recall Auto Setup
Toggle
Diag OCP
BS Cam
Next
2
Function
Picture monitor selection
BS internal menu enable
Adjustment H-Phase
Adjustment SC-Phase coarse
Adjustment SC-Phase fine
Notch Depth
Notch function
1
Level Possible values
S CVBS, R,G,B, Y, EXT1, EXT2,
Y/EXT1, Y/EXT2
S
B 0..99
B 0, 90, 180, 270
B 0..99
B 0..99
B On, Off
LDK 4502/4503/4506 HDTV camera base station User's Guide (v3.5)