No
Remove the door panel and kick plate.
Remove electrical power and disconnect
the two wires from the drain pump.
Apply electrical power, run the
diagnostic test for drain and measure
the voltage drop between the two wires.
0 Volts
Defective control
board or broken
wire.
Open
Dishwasher Will Not Drain
Run the diagnostic test for drain.
Does the drain pump run?
120 VAC
Remove electrical power.
Remove the stator winding
from the drain pump motor and
check it with an ohmmeter.
Around 30
ohms
Defective
stator
winding
Page 41
Yes
Check for restricted
drain hose, pinched
crossover hose, or
plugged pump.
Blocked pump.