Denon CEOL carino Owner's Manual page 30

Contents Connections
o Case 3: Connecting a Bluetooth device with the NFC function via NFC
You can just touch this unit with a Bluetooth device to turn on power to
this unit and perform paring or establish a connection between this unit
and the Bluetooth device.
1
Turn on the NFC function on the Bluetooth device.
For details, see the owner's manual for your Bluetooth device.
0
2
Touch Q on this unit with the NFC antenna part on the
Bluetooth device.
Power to this unit is turned on and the
flashes and this unit attempts to establish the Bluetooth connection.
When the Bluetooth connection is established, the
the display, which was flashing, is lit.
Complete operations as instructed by the Bluetooth device.
0
Front panel Display
Playback Setting procedure
3
indicator on the display
indicator on
Rear panel
30
Play back music on the Bluetooth device.
This unit outputs music from the Bluetooth device.
0 When you touch the N mark (Q) on this unit with the Bluetooth device that
is playing back music, this unit outputs that music.
0 Touch the N mark (Q) again during the Bluetooth connection to disconnect
the connection.
0 When you touch the N mark (Q) with a different Bluetooth device during
the Bluetooth connection, this unit stops playing back for the currently
connected Bluetooth device and connects to the newly touched Bluetooth
device.
NOTE
0 Before establishing a NFC connection, cancel the lock function on the Bluetooth
device.
0 When you touch this unit with a Bluetooth device, do so softly.
Remote
Tips Appendix
Index