Zte ZXHN H108L Maintenance Manual page 24

ZXHN H108L Wireless ADSL Router Maintenance Manual
WindowsXP as an example (the method under another operation
system is similar).
 To obtain an address from the ZXHN H108L via DHCP, perform the
following procedure in the computer:
1. In Windows taskbar, select Start > Control Panel.
2. Double-click the Network Connection icon.
3. Right click Local Area Connection,and select Properties.
4. Select Internet
Properties button.
5. In the Internet Protocol (TCP/IP) Properties dialog box,
check Obtain an IP address automatically and check Obtain
DNS server address automatically.
6.
Click OK to confirm and save the settings.
 To configure a static address, perform the following procedure in
the computer:
1. In Windows taskbar, select Start > Control Panel.
2. Double-click the Network Connection icon.
3. Right click Local Area Connection,and select Properties.
4. Select Internet
Properties button.
5. In Internet Protocol (TCP/IP) Properties dialog box, check
Use the following IP address to specify this computer's IP
address. This IP address shall be in the same network segment
as the LAN port address of the ZXHN H108L and shall be in the
form 192.168.1.x (x is a decimal integer between
example, 192.168.1.2). Subnet mask is
Default gateway is set to 192.168.1.1.
6. Check Use the following DNS server addresses. To set the
IP address of the DNS
set it to 192.168.1.1.
Click OK to confirm and save the settings.
10 Confidential and Proprietary Information of ZTE CORPORATION
Protocol (TCP/IP), and then click the
Protocol (TCP/IP), and then click the
server, contact local service provider or
2~254, for
set to 255.255.255.0.