Maintenance; Carbon Brushes; Optional Accessories - Makita BO4551 Instruction Manual

MAINTENANCE
6o
CAUTION: Always be sure that the tool is switched off and unplugged before
attempting to perform inspection or maintenance.
COARSE- For heavy sanding and
stripping. Paint and rust removal.
Carbon Brushes
The tool will stop when the carbon brushes wear to a certain length. When
this occurs, both carbon brushes should be replaced.
To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and
replacement, or any other maintenance and adjustment should be performed by
Makita Authorized or Factory Service Centers, always using Makita replacement
parts.
OPTIONAL ACCESSORIES
The accessories listed in this manual are available at an extra cost from your Makita
distributor or Makita factory service center. Service centers are listed on the
warranty card packed with your tool.
CAUTION:
These accessories or attachments are
recommended for
use
with your Makita tool
specified in this manual. The use of any
other accessories or attachments might
present a risk of injury
to
persons. These
accessories or attachments should be used
only in the proper
and
intended manner.
4" x 4
'12''
Sanding Paper
with Hook-and-loop
backing
(multi-purpose for sanding
wood and metal).
PART
NO.
742529-7
742520-A
742530-2
742531-0
742521 -A
742529-74
CITY.
PER
PKG.
5
-
5
5
5
5
-
-
Dust bag
part no. 166027-1
GRIT
I
USAGE
~~
MEDIUM COARSE
-
For fast stock
8o
I
removal and
medium
coarse
finish.
MEDIUM FINE
-
Moderately fast
stock removal and medium finish.
EXTRA FINE
-
For very smooth
coats of finish material.
5 ASSORTED SHEETS
-
2 each 60 Grit, 100 Grit & 150 Grit.
I
6