Video Cassette Tapes - Sanyo TLS-S7000P Instruction Manual

Time lapse video cassette recorder
Table of Contents

Advertisement

VIDEO CASSETTE TAPES

Use only video cassette tapes bearing the w or
| logo. This | VCR is designed to give high
quality recording and playback using | cassette
tapes. However, this VCR can also use normal VHS
cassette tapes for normal recording and playback. This
VCR was primarily designed for use with E-180
cassette tapes, it is recommended to use E-180 VHS
video cassette tapes for optimal performance.
Handling Cassette Tapes
The cassette tapes should always be stored vertically,
in their cases, away from high temperatures, magnetic
fields, direct sunlight, dirt, dust and locations subject to
mold formation.
Do not tamper with the cassette mechanism and never
touch the tape with your fingers.
Protect the cassette tapes from shocks or strong
vibrations.
To Protect your Recordings
After having recorded a tape, if you wish to keep the
recording, use a flathead screwdriver to break off the
erasure-prevention tab on the cassette.
To record again on a tape without erasure-prevention
tab, cover the hole with adhesive tape.
NOTES:
If you try to record on a cassette without
erasure-prevention tab, the VCR will eject the
cassette.
If the TIMER button is pressed when a cassette
without erasure-prevention tab is loaded, the timer
recording indicator (n) will start flashing and a buzzer
will sound.
Erasure-prevention tab
To prevent accidental
erasure, remove the
tab after recording.
Loading
1
Place the cassette, label side up, in the loading slot.
Gently push the centre of the cassette until it is
loaded automatically.
When the cassette is loaded, the cassette
°
indicator "o" will light on the digital display.
The time display will switch to the reset
°
counter "0
00
H
Label (Arrow side up)
Unloading
1
In STOP mode, press the EJECT button.
The cassette is automatically ejected.
°
NOTES:
Do not insert any object in the cassette loading slot,
as that may cause injury and damages to the VCR.
If your hand gets stuck in the cassette loading slot,
unplug the power cord and consult the dealer where
the unit was bought. Do not forcibly pull the hand out
as that may cause severe injuries.
8
To record again, cover
the hole with vinyl tape.
00
" display.
M
S
Arrow mark
GB
English

Advertisement

Table of Contents
loading

Table of Contents