Table of Contents
Advertisement
4-5 ATIS MMSI & ATIS Functionality
EU models ONLY
ATIS is only available in certain EU models. You must enter your ATIS MMSI to access ATIS
functionality. ATIS must be used if you are navigating inland waterways within Europe. An
ATIS MMSI is different to your DSC MMSI.
ATIS sends a digital message each time that you release the PTT key. Inland waterways rules
require 1 W Tx power on Channels 06, 08, 10, 11, 12, 13, 14, 15, 17, 71, 72, 74 and 77.
4-5-1 Enter or Edit YOUR ATIS MMSI
DSC SETUP
GROUP SETU▲
INDIV REPLY
►ATIS MMSI ▼
ATIS MMSI
923456789
►STORE
CANCEL
Note: An ATIS MMSI always starts with the number 9.
1.
To enter or edit your ATIS MMSI:
2.
Select DSC SETUP, then ATIS MMSI.
3.
If this is the first time that you are entering your ATIS MMSI, a dashed line appears. Enter
your ATIS MMSI along the dashed line using the +/- keys as described in Section 1-4.
The first number is always 9. Press ENT to confirm each correct entry and to move to
the next digit.
If you make an error, press - until < appears, then press ENT to backup and correct the
entry. If you are editing an existing ATIS MMSI, this will be displayed. Make the required
changes.
4.
Press ENT to store your user ATIS MMSI.
5.
You may need to enter your ATIS MMSI again as a password check, then press ENT to
permanently store the ATIS MMSI and return to the menu.
4-5-2 View your ATIS MMSI
You can view your stored ATIS MMSI at anytime by selecting ATIS MMSI in the main
menu, DSC SETUP.
28
INPUT ATIS
MMSI
----------
9
Simrad - RS12 Operation and Installation Instructions
INPUT ATIS
MMSI
►STORE
CANCEL
INPUT AGAIN
ATIS MMSI
----------
9
Hide quick links:
Advertisement
Table of Contents
