VuQube V20 Installation And Operating Instructions Manual page 27

Change to the DISH HD Western Arc Trio (110, 119, 129)
1. On the VuQube controller, press and release the
ON button. Wait for the status light to flash orange,
and then WAIT 4 MORE SECONDS.
2. Press and release the ON button 4 times.
The status light starts rapidly flashing green and red.
3. Press and hold the
The status light will turn orange for 1 second,
and then start flashing green or red.
4. Press OFF. GO TO PAGE 18 AND RUN THE CHECK SWITCH.
IMPORTANT! YOU MUST RUN THE CHECK SWITCH AFTER SWITCHING TRIOS!
Change to the DISH HD Eastern Arc Trio (61.5, 72, 77)
1. On the VuQube controller, press and release the
ON button. Wait for the status light to flash orange,
and then WAIT 4 MORE SECONDS.
2. Press and release the ON button 4 times.
The status light starts rapidly flashing green and red.
3. Press and hold the
The status light will turn orange for 1 second,
and then start flashing green or red.
4. Press OFF. GO TO PAGE 18 AND RUN THE CHECK SWITCH.
IMPORTANT! YOU MUST RUN THE CHECK SWITCH AFTER SWITCHING TRIOS!
button for 4 seconds.
button for 4 seconds.
Page 25