User Pins; Zone Chart - Siemens SPCK 420 User Manual

Appendix
7

User PINs

7.2
7.3
32
Siemens AB
Security Products
User Profile User type
Default
Users Manager
Delay autoarm Standard*
Manager
Bypass delay Standard
Manager
Upgrade Manager
X-10 Standard
Manager
Access Control
Door Control Standard*
Manager
Access Control
Web Access Standard*
Manager
Outputs Standard
Manager
WPA Test Standard
Manager
* Functions not enabled by default for this user but can be selected.
User PINs
The system supports 4, 5, 6, 7 or 8 PIN digits for each user, the translation of how
many logical combinations / variations can be found in the table below.
Number of digits
4
5
6
7
8
All User PINs are valid, hence for a 4 digit PIN the numbers can be from 0000
through to 9999 with any combination allowed in between.

Zone chart

Description
User can configure user on the panel.
User can delay auto setting.
User can automatically override the Unset Delay. Only
available for Financial installations. See
Setting/Unsetting
User can grant manufacturer access to panel to
perform firmware upgrade.
User can activate/deactivate configured X-10 devices.
User can lock/unlock doors.
User can access panel through web browser.
User can turn outputs (mapping gates) on and off. See
User can test a WPA.
Number of variations
10,000
100,000
10,000,000
10,000,000
100,000,000
A6V10209178
26.09.2011